PAMEL's PRD3W+ is used to control the power of heating elements. The maximum regulated power is 5.5kW.

Control of up to six independent valves !!!

To increase the number of probes to 8, you must purchase a splitter (HUB 5 to 1 or HUB 8 to 1)
It is possible to measure 8 probes from the XXL / 05/2016 software version

Description

By means of two buttons the user can regulate the power supplied to the circuit or it can be adjusted automatically (PID function). In the distillation mode, the power is selected to one temperature. In smoking mode, the power is determined based on the average temperature from selected sensors. The current power setting is displayed on the graphic LCD.
The device constantly displays a maximum of 5 temperatures e.g. cooler, tank, head, column, column2 in distillation mode or SONDA1, SONDA2, SONDA3, SONDA4 in curing mode. All probe names can be changed to any 10 letters
You can configure the audible alarms and the heater off temperature.
The device has the ability to automatically adjust power depending on the temperature difference measured by the probe and set by the user.
An additional advantage is the ability to display temperature charts as a function of time, making it easier to monitor the production cycle.

Heater power can be set manually by the user or the device can select it automatically as on the chart.

The device constantly monitors temperatures, also when setting settings.

Advantages

Resolution 0.05 degrees
Easy assembly
Graphic LCD display
Display rotated 180 degrees (down / up)
Can be used for both distillation and smoking (two modes switched at any time)
Ability to display your own nickname (8 characters)
Ability to create your own probe names (up to 10 characters)
Control of six devices, e.g. ARC valve, water valve, smoke generator, fan
Liquid level sensor input
Three curing stages with the possibility of setting different times and temperatures
Adjusting the display brightness
Detachable probes
Temperature graphs as a function of time
Unlike two-wire digital probes, three-wire digital probes ensure accuracy over the full temperature range
Ease of use

Warranty
60 months

Technical data
Supply voltage: 230V / 50Hz +/- 10% V
Power regulation range: 1-100% (phase or group control after purchase)
Liquid level sensor input (option)

Temperature resolution 0.05 degrees
Resolution power regulation 0.125%

Outputs for up to six solenoid valves (e.g. water, distillate)

Maximum regulated power: 5.5kW
Current protection: YES
Thermal protection: YES
Cooling: forced (fan)
Maximum power consumption: 4W

Drivers are also used in:
- distillation (moonshine)
- curing smoked meats, meat
- brewing (brewing beer)

The number of exits and other configurations to choose from on the page as options when buying.

Due to the large selection of the number and type of probes, they should be purchased in the SENSORS section

If you want a different configuration, please contact Customer Service