Description
PAMEL's PRD3F+ DUO is used to regulate the power of heating elements. The maximum regulated power is 3x5,5kW, 3x230V 3x400V).

It consists of two parts: a panel and an executive module. Thanks to this, the user can attach a thin panel and place the entire executive module in a different place. All power and measuring leads lead only to the executive module. Both modules are connected with each other by means of a thin 2m long cable.

Control of up to three independent valves !!!

By means of two buttons the user can regulate the power supplied to the circuit or it can be adjusted automatically (PID function). In the distillation mode, the power is selected to one temperature. In curing mode, the power is determined based on the average temperature from selected sensors. The current power setting is displayed on the graphic LCD.
The device constantly displays a maximum of 5 temperatures e.g. cooler, tank, head, column, column2 in distillation mode or SONDA1, SONDA2, SONDA3, SONDA4 in curing mode. All probe names can be changed to any 10 letters
You can configure the audible alarms and the heater off temperature.
The device has the ability to automatically adjust power depending on the temperature difference measured by the probe and set by the user.
An additional advantage is the ability to display temperature charts as a function of time, making it easier to monitor the production cycle.

Heater power can be set manually by the user or the device can select it automatically as on the chart.

The device constantly monitors temperatures, also when setting settings.

Advantages

It can work as a single-phase or multi-phase device (star, triangle)

Resolution 0.05 degrees
Easy assembly
Graphic LCD display
Display rotated 180 degrees (down / up)
Can be used for both distillation and curing (two modes switched at any time)
Ability to display your own nickname (8 characters)
Ability to create your own probe names (up to 10 characters)
Control of three devices, e.g. ARC valve, water valve, cure generator, fan
Liquid level sensor input
Three curing stages with the possibility of setting different times and temperatures
Adjusting the display brightness
Detachable probes
Temperature graphs as a function of time
Unlike two-wire digital probes, three-wire digital probes ensure accuracy over the full temperature range
Ease of use

Warranty
30 months

Technical data
Supply voltage: 230V / 50Hz +/- 10% V 3x230V 3x400V (can work as a single, two or three-phase device)

Power regulation range: 1-100% (phase or group control after purchase)
Liquid level sensor input

Temperature resolution 0.05 degrees
Resolution power regulation 0.125%

Outputs to three solenoid valves (e.g. water, distillate)

Maximum regulated power: 5.5kW 2x5.5kW 3x5.5kW
Current protection: YES
Thermal protection: YES
Cooling: forced (fan)
Maximum power consumption: 4W

The number of probes, outputs and other configurations to choose from on the page as options when buying.

If you want a different configuration, please contact Customer Service

Certificates and safety warnings

CE marked (compliance with EU standards).

Manufacturer:

PAMEL

Address:

Urodzajna 5e, 42-300 Myszków, Poland

E-mail:

pamel@pame.pl

Responsible person in the EU:

PAMEL

Address:

Urodzajna 5e, 42-300 Myszków, Poland

E-mail:

pamel@pamel.pl

add to compare

Ask about the product

THREE-PHASE STAINLESS HEATER 5/4 (1)
Manufacturer PAMEL

Price €54.30

Price €44.15
without VAT
ECONOMIC SOLENOID VALVE FOR ALCOHOL
Manufacturer PAMEL

Price €13.93

Price €11.33
without VAT