PAMEL PRD1+ – socket-mounted power regulator for distillation, heaters, and other devices

Convenient and modern power regulation

PAMEL PRD1+ is a practical power regulator designed to control heating elements and other devices powered by a 230V mains. It allows you to conveniently set the power level and adapt the device's operation to a specific application. This is a very good solution for those who want greater control over the process and prefer to use more convenient and modern equipment than simple knob-based regulators.

The device is particularly well-suited for distillation, but can also be used with other appliances that require power regulation. The maximum power of the controlled load is 5.5 kW, making the controller suitable for more demanding applications.

Especially useful for distillation

In distillation, the correct heating power setting is crucial. Too much power can hinder the smooth running of the process, while too little can prolong operation and reduce user comfort. PRD1+ allows you to precisely adjust the power to a specific stage of operation, making the entire process easier to control.

This solution is for people who want to:

• easily control the heater,
• limit excessive heating,
• better match the power to their setup,
• work more consciously and repetitively.

Buttons instead of a potentiometer – a major advantage in everyday use

One of the major advantages of this controller is control with buttonsrather than a standard potentiometer and knob.

This solution is more modern, more convenient, and simply more practical. Many inexpensive devices still use classic potentiometers, which can wear out, oxidize, become dirty, or operate less reliably over time. In practice, this means poorer repeatability of settings and less convenient operation.

Here, adjustments are made using buttons, so:

• settings are more repeatable,
• operation is more reliable,
• there is no problem with a "floating" knob,
• the user knows exactly what value they have set.

In modern devices, potentiometers are increasingly being replaced by buttons and displays, as this is a more convenient and precise solution.

The display shows the specific setting

A very important advantage of the controller is the clear LED displaywhich shows the specific power setting.

This is a huge difference compared to a standard knob and a rough line on the scale. In simple potentiometer controllers, the user often only roughly estimates the knob position. Here, you see the exact set value, so:

• it's easier to return to a proven setting,
• it's easier to set the same power again,
• it's easier to compare settings,
• it's easier to precisely adjust the device's operation.

This translates into more convenient and predictable operation.

Simple two-button operation

The controller is equipped with two buttonsthat allow you to quickly and conveniently change settings. Operation is intuitive, and changing the power doesn't require turning a knob or guessing settings.

This control method works well for everyday use, especially when you want to repeatedly return to the same values ​​and want greater accuracy.

Three Start Modes – Greater Operating Freedom

PRD1+ offers 3 Start Modes:

• Quick Start,
• Soft Start from 0% to the set value,
• Full Start from 100% to the set value.

This is a very practical feature, as different devices may require different start-up methods. In some cases, a soft start works better, while in others, a stronger initial start is needed.

This allows the controller to be more flexible and its operation can be better tailored to a specific appliance.

Setting the MIN/MAX range and adjustment step

The controller allows you to set:

• minimum power level,
• maximum power level,
• adjustment step, for example, 1%, 5%, or another setting tailored to your needs.

This is a very convenient solution because it allows you to limit the operating range to the most useful values. This allows you to change settings faster or fine-tune the device where accuracy is key.

In practice, this means:

• less clicking,
• more convenient operation,
• better adjustment of the controller to your equipment.

Power up to 5.5 kW

The controller supports loads up to 5.5 kW, making it suitable for use with more powerful heating elements and more demanding devices.

This provides a large margin of efficiency and makes the PRD1+ not only a simple controller for small appliances, but can also be used where more reliable control of higher power is required.

Forced cooling and thermal protection

The device is equipped with a built-in fan, which means forced coolingand thermal protection.

This is an important advantage, especially with higher loads and longer operating times. This makes the controller more efficient in everyday use and prepared for more demanding operating conditions.

Safer connection

PRD1+ also has PE protective terminals, which improves user safety and streamlines the device's connection.

This is an important detail, but it has real significance when working with heating equipment and devices with higher power.

Not just for distillation

Although the controller works very well for distillation, its application is much broader.

It can be used wherever you need:

• heater power adjustment,
• convenient device control,
• proper start-up,
• more modern and precise operation than with a standard knob.

Therefore, it is also well-suited for other heating devices and selected appliances where convenience and precise operation settings are important.

Key advantages

• adjustable load power up to 5.5 kW,
• modern control by buttons,
• no classic potentiometer with a knob,
• greater durability and more convenient operation,
• the clear LED display showing the specific setting,
• no guessing the position of the knob and the scale line,
• 3 Start Modes,
• possibility of setting MIN/MAX,
• possibility of setting the adjustment step,
• forced cooling,
• thermal protection,
• protective terminals PE,
• very well suited for distillation and other heating applications.

Technical Specifications

• Model: PRD1+
• Power Supply: 230 V / 50 Hz ±10%
• Maximum Regulated Load Power: 5.5 kW
• Regulation Resolution: 1%
• Control Method: Phase-controlled
• Cooling: Forced, built-in fan
• Thermal Protection: Yes
• Power consumption: up to 0.2 W
• Warranty: 24 months

Why choose the PRD1+?

PAMEL PRD1+ is a controller for people who want to control power more conveniently, precisely, and in a more modern way than using a standard knob. Buttons and a display provide greater precision, better repeatability of settings, and more convenient operation.

Instead of setting it "by eye," you get a specific value on the display and more reliable control. It's simply a more practical solution for everyday work.