PAMEL PT1WIFI – Wi‑Fi time controller | S8 7 days, URLOP mode

Go to Product feedback

PAMEL PT1WIFI is an advanced Wi‑Fi time controller designed to automate pumps, blowers and other loads. Its strongest S8 mode offers 7 days × 48 half-hour slots, OFF/ON/TAKT1/TAKT2/TAKT3 states and URLOP date-to-date mode. It is especially useful for hot-water circulation pumps and aeration of septic tanks and domestic wastewater treatment systems.

Go to full description

169,00 zł

Quantity

szt.

Availability:

duża ilość

Shipping time: 24 godziny

Instrukcje, FAQ, PAMEL EDU, oprogramowanie i pomoc techniczną znajdziesz w Centrum PAMEL.

CENTRUM PRODUKTU

PAMEL • TIME CONTROLLER • WI‑FI

PT1WIFI — much more than an ordinary time controller

PT1WIFI combines classic timer modes with the advanced S8 weekly program, three independent cycling patterns, the URLOP holiday mode and convenient web-based configuration. It is especially useful wherever a load should not run continuously: hot-water circulation, aeration of septic tanks and treatment systems, blowers, ventilation, lighting and other time-controlled devices.

9 modes S0–S8S8: 7 days × 48 slots336 slots per weekTAKT1 / TAKT2 / TAKT3URLOPWi‑Fi + Web

Hot-water circulation pump — one of the best applications for PT1WIFI

A DHW circulation pump does not need to run all day. PT1WIFI lets you create a weekly rhythm that follows the household routine: morning, afternoon and evening, with different settings for weekdays and weekends.

in S8 you select active 30-minute periods,
in an active period you can choose continuous ON or one of three cycling patterns,
a cycling pattern can, for example, run the pump for a few minutes and then keep it off for a longer break,
URLOP mode lets the controller automatically switch to a selected behaviour for the duration of your absence.

PT1WIFI – hot-water circulation pump control

PT1WIFI – programming aeration of septic tanks and treatment systems

Aeration of septic tanks and domestic wastewater treatment systems

Blowers and aerators very often need cyclic operation. PT1WIFI can perform repeating ON/OFF cycles and, in S8, assign different rhythms to specific times of day and days of the week.

a simple T1/T2 cycle in S2 mode,
an advanced 7-day program in S8,
TAKT1 / TAKT2 / TAKT3 — three different operating rhythms available within the same week,
change the program without opening the enclosure — from the web panel over Wi‑Fi.

Important: aeration parameters should be selected for the specific treatment system and according to its manufacturer’s recommendations. URLOP mode must not be treated as automatic permission to completely stop a biological treatment process.

S8 — 7-DAY PROGRAM. The feature that makes the difference

Instead of entering many start and stop times, you get a clear weekly board. Each day has 48 half-hour slots — 336 tiles in total.

336 tiles

7 days × 48 half-hour slots. You see the entire week at once and program it by clicking the tiles.

5 tile behaviours

Each tile can have the state OFF, ON, TAKT1, TAKT2 or TAKT3.

URLOP from–to

Enter the start and end date of your absence and choose how the device should behave during that period.

TAKT1, TAKT2 and TAKT3 — three rhythms in one week

This is one of S8’s strongest features. During one part of the day the device can run continuously, during another it can follow a fast cycle, and at night it can use a completely different rhythm.

TAKT1

Custom ON time and custom OFF time.

TAKT2

A second independent set of ON/OFF times.

TAKT3

A third set — for example for night-time or energy-saving operation.

PT1WIFI – three independent S8 cycling patterns

9 modes S0–S8

PT1WIFI retains the simple modes known from classic timers while adding the advanced S8 mode.

Mode	Name	Operation
S0	MANUAL TIMER	Switches on for the set time; the time can be changed directly.
S1	TIMER START	START begins the programmed T1 time.
S2	ON/OFF CYCLE	Repeating operation: T1 ON, T2 pause.
S3	DELAYED START	After T1 has elapsed, the output switches on.
S4	15 MIN TIMER	Like S0, but with quick time changes in 15-minute steps.
S5	RANDOM CYCLE	T1 ON, followed by a random 1–10 minute pause.
S6	TIMED OFF	Normally ON; START switches the load off for T1.
S7	AUTO START	Like S1, but starts automatically after power-up.
S8	7-DAY PROGRAM	All-day operation or a weekly program with 7 × 48 half-hour slots.

Web panel over Wi‑Fi

After connecting to PT1WIFI, you configure it in a standard web browser. No separate app is required.

START / STOP and program reset,
selection of mode S0–S8,
setting T1 and T2 in HH:MM:SS format,
full S8 editor with tiles, cycling patterns and URLOP,
Wi‑Fi network configuration.

PT1WIFI – Wi-Fi, NTP synchronisation and OTA updates

Wi‑Fi, NTP clock and OTA updates

connection to a saved Wi‑Fi network,
emergency AP access point if the normal connection fails,
automatic time synchronisation from the Internet using NTP,
an optional DS1307 RTC module can retain time after a power outage,
OTA firmware updates from the PAMEL server.

What else can it do?

PT1WIFI is a universal time automation controller. It can control a load wherever hours, cycles, day of week or an absence period matter.

DHW circulation

Operation only when needed and according to the selected rhythm.

Aeration

Cyclic blower operation matched to the installation.

Ventilation

Regular starting of fans and air exchange.

Lighting and more

Hourly, weekly and holiday automation.

Load selection. PT1WIFI controls an electrical load, but the permissible load must always be matched to the controller parameters and the type of connected device. Pump and blower motors can have a starting current much higher than their running current; for larger loads, use a suitable contactor or interposing relay.