PAMEL PSC1 – DIN rail timer

Go to Product feedback

The PAMEL PSC1 is a DIN rail timer controller for single and cyclical operation. It allows you to set up to 5 time periods, separate programs for weekdays and weekends, and independent T1/T2 times. It operates with a resolution of 1 second or 1 minute, supports times up to 9999 seconds/minutes, and controls loads up to 1 kW.

Go to full description

145,00 zł

Quantity

szt.

Availability:

duża ilość

Shipping time: 24 godziny

PAMEL • POLISH MANUFACTURER

PSC1 – T1/T2 cycles, time windows and DIN rail mounting

The PSC1 is designed to automate time-based devices such as pumps, fans, lighting, heaters, and sprinklers. It can operate 24/7 or only during selected periods, with different settings for weekdays and weekends.

DIN rail1 s / 1 minup to 9999up to 5 time windowsT1/T2 cycles

The most important features

Up to 5 time intervals

The controller can limit cyclic operation to selected time intervals or operate continuously around the clock.

Independent T1 and T2

You can set different on and off times for each interval.

Weekdays and weekends

Time programs can be set separately for weekdays and weekends.

Features and equipment

DIN rail mounting
control of the connected device's switch-on and switch-off times
cyclical operation T1 / T2
up to 5 time intervals or continuous 24-hour operation
different settings for weekdays and weekends
resolution 1 second or 1 minute
maximum time 9999 seconds or minutes
maintaining the current time for up to 10 years
clear LCD display
maximum load power 1 kW
maximum power consumption 0.5 W, typical about 0.3 W

Photos and materials

Technical data

Power supply	230 V / 50 Hz ±10%
Time resolution	1 second or 1 minute
Maximum time	9999 seconds or minutes
Number of time intervals	up to 5 or continuous 24-hour operation
Weekly program	weekdays and weekends separately
Maximum power	1 kW
Power consumption	0.5 W max; approximately 0.3 W typical

Important: The number of probes, outputs, interfaces, and other accessories may depend on the variant selected at purchase. Before connecting, please refer to the current device manual.

Instructions, FAQs and PAMEL Help

Current product materials and technical support can be found at the PAMEL Center.

OPEN PAMEL CENTER

Certificates and safety warnings

Manufacturer:

PAMEL

Address:

Urodzajna 5e, 42-300 Myszków, Poland

E-mail:

pamel@pamel.pl

Responsible person in the EU: